Manufacturers

Manufacturers of :

  • Power Distribution Boards, Intelligent PCC, DG Synchronization Panel, Auto Mains Failure Panel, Automatic Power Factor Correction Panels, LT KIOSK, ENERGY MANAGEMENT SYSTEM Etc
  • MCC - Compartmentalisd & Non compartmentalised type, MCC Panels with Or without MIMIC (With PLC or Without PLC), Drive Panels, Automation Panels, SCADA Systems, Instrumentation Panels etc.

Specifications:

  • 01. All Panels are made up of 14/16 SWG CRCA material semi bolted structure firmly supported. Ensures desired breaking capacities, temperature rise & IP protection. Enough Space for incoming & outgoing Cable termination. Outgoing terminals are stud type as standard practice. All starters are Type Two Co-ordinated. CT terminals, Cable Alley Illumination Lamp, Space Heaters with Thermostats are standard features of our Panel boards suitable for 3 phase 415V 4 wire 50 Hertz system. All boards accessible from the front or as shown on Drawings and specified in the equipment data sheet, for the maintenance of switch fuses, bus bars, cable terminations, meters etc.
  • 02. Cables capable of entering the board both from top as well as bottom. All panels machine pressed with punched openings for meters etc. All sheet steel passed through 7 tank rust removing process of degreasing, acid pickling, phosphating etc. The panels finished with powder coating of approved colour applied over a primer. Engraved plastic labels provided indicating the feeder details, and capacity and danger signs.
  • BUSBARS : Non-insulated or insulated high conductivity copper/Aluminium bus bars with neutral are housed at the top section of the cubicle. The main bus bars are mounted and supported on SMC bus bar supports. The bus bar chamber is housed in a separate compartment on top of the cubicle with facilities for segregation. Maximum temperature rise is less than 70°C on an ambient of 40°C.
  • MCC/PCC/ DB Specification(Constructional Features): The Design of the PCC/MCC panel is robust and rigidly constructed to suit a wide range of industries and buildings. The supporting structures which form the framework are made up from 2.0 mm thickness steel sections, fully pressed and punched by CNC machines. The door covers, partitions and panel parts are fabricated with NC machines for high precision and accuracy. Base degree of protection is IP42. Higher degree of protection like IP54 or more can be manufactured on request
  • Drawings : Following Drawings are provided to the customer before starting the manufacturing of PCC/MCC of the panel:
    • General Arrangement
    • Single Line Diagram
    • Bill of Material
    • General Notes
    • Control Circuits
    After manufacture & testing of panel as built diagram are provided.
  • Test: Following Tests can be witnessed by the customer
    • Dimensional Check
    • Bill of Material Verification
    • Functional Checks
    • Relay Function Test( On case to Case basis)
    • Insulation resistance test
    • High Voltage Test 2.5. KV for 1 minute
    All boards combination of 14 & 16 SWG sheet steel, free standing, extensible, totally enclosed, dust tight, vermin-proof cubicle, flush dead front and of modular construction suitable for 3 phase 415V 4 wire 50 Hertz system. All boards accessible from the front or as shown on Drgs and specified in the equipment data sheet, for the maintenance of switch fuses, busbars, cable terminations, meters etc. Cables capable of entering the board both from top as well as bottom. All panels machine pressed with punched openings for meters etc. All sheet steel passed through 7 tank rust removing process of degreasing, acid pickling, phosphating etc. The panels finished with powder coating of approved colour applied over a primer. Engraved plastic labels provided indicating the feeder details, and capacity and danger signs.
LIST OF RECOMMENDED MAKES OF MATERIALS
S.NO. EQUIPMENT DISCRIPTION Low Voltage (433V) SYSTEM: MAKES OF EQUIPMENT.
1A M.V.Panel Manufacturers VLPCPB- Sister Concern
1B APFC Panel Manufacturers VLPCPB- Sister Concern
2 Air Circuit Breakers Schneider / SIEMENS / ABB
3 Moulded Case Circuit Breakers Schneider / SIEMENS / ABB
4 MCB’s, ELMCB and ELCB’s Schneider / SIEMENS / ABB
5 Distribution boards VLPCPB- Sister Concern
6 Current Transformers KALPA / KARTHIKEYA
7 CT Test Link Elmex type CST / CONNECTWEL
8 Protection relays Alstom / C & S / PC / Siemens
9 Meters CONZERVE / SECURE / ELMEASURE
10 Control switches. Schneider / SALZER
11 Control Fuses Siemens / BUSMAN
12 Indicating Lamps, Push Buttons. TEKNIK/ESSEN.
13 Contactor Siemens / L & T /Schneider/ABB
14 Terminal block Elmex type CST / equivalent
15 Wires Finolex / Polycab/ RR
16 Auto Transfer Switch ASCO/ ABB
17 Copper Flexible Cables. Polycab/LAPP
18 Rotary switches Kaycee, SALZER
19 Load Manager CONZERVE, SECURE, ELMEASURE
20 Isolation Transformer UNIT SERVICES
21 APFC Relay Trinity / Schneider
22 Capacitors Schneider
23 Protection Relays L & T/ C&S
24 Motor Protection Circuit Breakers Schneider / SIEMENS / ABB
25 PLC Schneider / SIEMENS / ABB
26 DRIVES Schneider / SIEMENS / ABB
27 SCADA Schneider / SIEMENS / ABB
28 INSTRUMENTATION SIEMENS / ABB
Get a Quote

Request A Quote